Empire BMX 3.5" die cut sticker
Empire BMX 3.5" die cut sticker

Empire BMX 3.5" die cut sticker

SKU: 1063800
0
Your rating: None
Write a review

$1.50 USD



vinyl rub-on sticker (application instructions below)
the total sticker is approximately 3.5" long and 0.75" tall
this die cut sticker defines the tight pants BMX scene!
Jagaire jagged me ov
 
Step 1
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the sticker from adhering well
 
Step 2
Rub a squeegee or credit card firmly across the sticker through the clear transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed
 
Step 3
Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2
 
Step 4
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step
 
Step 5
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

Please sign in or register to post a review